Working on the neck.

Today I decide to do some work on the neck. I first need to re joint the edge:

https://www.dropbox.com/s/19i8amrk34i99me/20210427_115701.jpg?dl=0

https://www.dropbox.com/s/907j2ytln8y9zqr/20210427_115727.jpg?dl=0

Next I remeasure the cutoff point. This is .75" past the 14th fret. After I take it to the tablesaw and cut it off:

https://www.dropbox.com/s/akv010rrd51znh0/20210427_161448.jpg?dl=0

With some tracing paper I make a template for the heel cutout, to cut with the bandsaw:

https://www.dropbox.com/s/bzp028i8mv610yn/20210427_164002.jpg?dl=0

https://www.dropbox.com/s/s4zn2rofeafqiax/20210427_170250.jpg?dl=0

After the cut I needed to take down some measurements fron the tuners. Right now I am interested on how thick the headstock needs to be:

https://www.dropbox.com/s/a0qf7dg3qu2u9wn/20210427_171444.jpg?dl=0

At the end of the day I redo all the measurement lines and then draw the fretboard onto the neck:

https://www.dropbox.com/s/p1a28jjwnxbmmz8/20210427_172722.jpg?dl=0