A neck is forming.

I need a white piece of veneer and black to complete the headstock package. I cut them from sheets of veneer I have:

https://www.dropbox.com/s/zfdj6d1qboy4p57/20210428_182742.jpg?dl=0

https://www.dropbox.com/s/ps83oon001c0hnq/20210428_183332.jpg?dl=0

Ill stack these and glue them to the headstock. Later I will bevel the edge of the headstock and give it a bit of a flare. Almost like the headstock was bound.

After, I route the channel for the truss rod:

https://www.dropbox.com/s/e43vv3zt8gdih5q/20210429_152908.jpg?dl=0

I then tape the nut area. I dont want glue on it when I glue the headstock package on. I also place some placement pins through the package and headstock:

https://www.dropbox.com/s/vapeccyipzwruhn/20210429_160047.jpg?dl=0

Next I glue the package on and let it sit over night:

https://www.dropbox.com/s/omblxjqrxqrtuhz/20210429_164121.jpg?dl=0

https://www.dropbox.com/s/0otvy5zsjhnxaj3/20210429_164129.jpg?dl=0